main logo

Paper Display

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 8. Dezember 2025
IBest
IBest
waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,15 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 66,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 3.52inch e-Paper Display (B), e-Ink Display, 360x240, Red/Black/White, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico, Support Jetson Nano/TX2/Xavier N/Orin and RDK X3
Kostenloser Versand
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 29,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
Kostenloser Versand
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Kostenloser Versand
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen with Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable for Price Tag, Asset/Equipment Tag, Shelf Label...
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper HAT Display Module, 800×480 Resolution, Supports Black/White 2 Colors, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Kostenloser Versand
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 10.2inch e-Paper Display (G), e-Ink Display, 960x640, Red/Yellow/Black/White, SPI Interface, with e-Paper Driver HAT, Compatible with Raspberry Pi 5/4B/3B/CM3/3+/4
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • No Backlight, Persistent Display: The display doesn't require a backlight and maintains the last content shown for a long time, even when powered down, making it ideal for low-maintenance applications.
  • Ultra Low Power Consumption: The display is energy-efficient, consuming power only when refreshing the content, which makes it perfect for batt-powered projects or those with limited power availability.
  • Comprehensive Development Resources: The display includes online resources and a manual, featuring an e-Paper Driver HAT circuit diagram and example code for various platforms like Raspberry Pi, Jetson Nano, Arduino, and STM32, enabling quick setup and development.
  • Flexible Connectivity with e-Paper Driver HAT: The optional e-Paper Driver HAT features a standard 40PIN GPIO extension header, making it compatible with Raspberry Pi series boards and Jetson Nano, providing versatile connectivity options.
  • SPI Interface and Voltage Compatibility: The e-Paper Driver HAT utilizes an SPI interface for connecting with controller boards like Raspberry Pi, Jetson Nano, Arduino, and STM32, and includes an onboard voltage translator to ensure compatibility with both 3.3V and 5V MCUs. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 149,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
Kostenloser Versand
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 36,99 € AUF AMAZON
xicoolee
xicoolee
7.5inch E-Paper Display 800x480 Resolution, SPI Interface E-Ink Screen for Raspberry Pi, Arduino, STM32, ESP32 - Monochrome HAT with Partial Refresh & Open-Source Code
star

68

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • High-Resolution E-Ink Display – 7.5-inch monochrome E-Paper screen with 800x480 resolution, delivering crisp text and graphics for e-books, digital signage, industrial labels, and IoT projects.
  • Fits Raspberry Pi & Multi-Board – Designed for Raspberry Pi 40-pin GPIO (all models) and pre-configured SPI interface for Arduino, STM32, and ESP32 integration. Level-shifting chip supports 3.3V/5V microcontrollers.
  • SPI Communication & Partial Refresh – Optimized SPI interface minimizes pin usage and enables fast full/partial refresh modes to reduce power consumption and screen flickering.
  • Open-Source Development Support – Includes ready-to-use C/Python code for Raspberry Pi and Arduino/STM32/ESP32 examples for drawing shapes, text, and images. Ideal for DIY and industrial prototyping.
  • Versatile E-Paper Applications – Perfect for e-readers, smart price tags, logistics labels, conference nameplates, electronic memos, and energy-efficient digital billboards.
  • 59,50 € AUF AMAZON
paper display ipad e paper display e-paper display paper display wlan tablet paper display electric paper display ink paper display paper ink display display stand paper paper display stand