Nvme Base Duo For Raspberry Pi 5
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
10. Dezember 2025
Pimoroni
"Pimoroni NVMe Base (M.2 2230, 2242, 2260 und 2280) SSD PCIe für Raspberry Pi 5 (bis zu 800 MB/s!)
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Erweitern Sie Ihren Raspberry Pi 5 Speicher
Ultraschnelle NVMe SSD-Übertragung
Kompatibel mit M.2-Formaten 2230-2280
Unterstützt bis zu 800 MB/s Datengeschwindigkeit
Ideal für leistungsstarke Anwendungen
29,11 € AUF AMAZON
FREENOVE
FREENOVE Dual M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 2 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € AUF AMAZON
GeeekPi
GeeekPi N21 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator, N21 Dual 2280 NVMe Base, Support Two 2230/2242/2260/2280 NVMe SSDs
20% Rabatt
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatibility: GeeekPi N21 Dual NVMe SSD Shield Bottom only compatible with Raspberry Pi 5
Support Dual M.2 NVMe SSD with multiple length: Support M.2 M-Key NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
Raspberry Pi 5 AI Hat Extension: Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
Support NVMe Boot: Supports NVMe boot with eeprom 2024/05/17 and later version
How to Power: 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
27,98 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,50 € AUF AMAZON
SUNFOUNDER
SunFounder Dual NVMe Raft für Raspberry Pi 5 PCIe Gen 2.0 zu M.2 HAT Key-M SSD Hailo-8L AI Accelerator Pip M.2 2230/2242/2260/2280, NAS RAID 0/1, Handbuch (Nicht kompatibel mit der Pironman Serie)
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Das Dual NVMe Raft fügt zwei M.2 M-Key Steckplätze (2230-2280) für Raspberry Pi 5 (2GB/4GB/8GB/16GB) hinzu, unterstützt PCIe Gen 2.0 mit bis zu 500MB/s Geschwindigkeit und 3A Leistung pro Steckplatz. Unterstützt zwei SSDs für RAID 0/1 oder eine SSD + Hailo-8L AI-Beschleuniger für Echtzeit-KI-Leistung. Perfekt für Hersteller, NAS-Builder und KI-Entwickler
Verwandeln Sie Ihren Raspberry Pi 12.7 cm einen leistungsstarken Server mit dem Dual NVMe Raft. Unterstützt OpenMediaVault, RAID 0/1 und Dual-SSDs für schnelle, zuverlässige Speicherung. Schnell zu installieren, perfekt für NAS, Home Assistant, Media und Game Center
Das Dual NVMe Raft unterstützt eine SSD und einen Hailo-8L AI-Beschleuniger, der schnellen Speicher mit Echtzeit-KI-Leistung kombiniert. Ideal für KI-Projekte wie Vision und Automatisierung – ideal für Entwickler, Robotikhersteller und Edge-KI-Lerner
Das Dual NVMe Raft kommt mit allem, was Sie brauchen: 2 PCIe FPC-Kabel, SSD-Befestigungsschrauben, Kupfersäulen und eine übersichtliche Installationsanleitung (evtl. nicht in deutscher Sprache). Mit Schritt-für-Schritt-Anleitungen und Online-Tutorials ist die Einrichtung schnell und anfängerfreundlich
Holen Sie sich Hilfe, wenn Sie sie brauchen – SunFounder bietet detaillierte Tutorials, Online-Dokumentation und aktive Community-Foren, die Sie durch jeden Schritt führen. Egal, ob Sie ein Anfänger oder ein fortgeschrittener Hersteller sind, unser Team ist hier, um Ihren Projekterfolg zu unterstützen
25,99 € AUF AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1005 PCIe Peripheral Board, 2x 37mm PCIe FFC Cable(One as backup), 1x Screws Pack
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
38,00 € AUF AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 PCIe to NVMe Base, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
15,80 € AUF AMAZON
GeeekPi
GeeekPi N20 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5, Support Dual M.2 M-Key NVMe SSD 2242
21% Rabatt
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】GeeekPi N20 Dual 2242 NVMe HAT is only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB, also compatible with the Raspberry Pi 5 official active cooler or GeeekPi Armor Lite V5 Cooler, Please noted, the M.2 NVMe 2242 SSD,Active Cooler and Raspberry Pi 5 Board are not included!
【Support Dual M.2 SSD】GeeekPi N20 Dual 2242 NVMe HAT Supports the installation of two M.2 M-Key NVMe 2242 SSDs.
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use GeeekPi PD 27W Power Adapter (ASIN: B0CQ1Q18HX)
【Support NVMe Boot】GeeekPi N20 Dual 2242 NVMe HAT now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Note】Since N20 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
23,73 € AUF AMAZON
Geekworm
Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【for use with】① for Raspberry Pi 5 with PCIe to Dual M.2 NVMe Shield Base X1005 (ASIN: B0D89MZTCY); ② for Raspberry Pi 5 with PCIe to M.2 NVMe Shield Base X1002 (ASIN: B0CQXPCNZK)
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P580-V2 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P580-V2 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1002/X1005 PIP Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
12,00 € AUF AMAZON
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € AUF AMAZON
nvme base for raspberry pi 5
nvme base case for raspberry pi 5
raspberry pi 5 nvme base
nvme raspberry pi 5
raspberry pi 5 nvme
pimoroni nvme base für raspberry pi 5
raspberry pi 5 dual nvme
pimoroni nvme base für raspberry pi 5, pcie
gehäuse raspberry pi 5 nvme
raspberry pi 5 gehäuse nvme
#1 GEWINNER
