main logo

Micro Swiss Hotend Bambu Lab

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 14. Oktober 2025
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab P1P/P1S - CM2 CHT - Hardened Tip - High Flow
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Bambu Lab Printers.
  • An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.
  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • 96,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab P1P/P1S - CM2 - Hardened Tip - Standard Flow
Kostenloser Versand
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • Fully compatible with the growing FlowTech ecosystem, offering a wide range of nozzle options.
  • 85,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab P1P/P1S - Brass Plated CHT - High Flow
Kostenloser Versand
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Bambu Lab Printers.
  • An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.
  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • 96,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab X1/X1C - CM2 - Hardened Tip - Standard Flow
Kostenloser Versand
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • Fully compatible with the growing FlowTech ecosystem, offering a wide range of nozzle options.
  • 85,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab X1/X1C - CM2 CHT - Hardened Tip - High Flow
Kostenloser Versand
star

85

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Bambu Lab Printers.
  • An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.
  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • 96,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab X1/X1C - Brass Plated CHT - High Flow
Kostenloser Versand
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Bambu Lab Printers.
  • An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.
  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • 91,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab P1P/P1S - DiamondBack - Diamond Tip - Standard Flow
Kostenloser Versand
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • Fully compatible with the growing FlowTech ecosystem, offering a wide range of nozzle options.
  • The collaboration between Micro Swiss and DiamondBack introduces the most advanced nozzle to the FlowTech ecosystem. This nozzle features a proprietary Polycrystalline Diamond (PCD) insert, developed after 40 years of diamond technology research, designed to tackle the most challenging printing applications.
  • 186,90 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Bambu Lab X1/X1C - DiamondBack - Diamond Tip - Standard Flow
Kostenloser Versand
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
  • Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
  • The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
  • Fully compatible with the growing FlowTech ecosystem, offering a wide range of nozzle options.
  • The collaboration between Micro Swiss and DiamondBack introduces the most advanced nozzle to the FlowTech ecosystem. This nozzle features a proprietary Polycrystalline Diamond (PCD) insert, developed after 40 years of diamond technology research, designed to tackle the most challenging printing applications.
  • 186,90 € AUF AMAZON
Microswiss
Microswiss
FlowTech Spare Heater Core for Bambu Lab P1 (M3109P)
Kostenloser Versand
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • This is a spare Heater Core for Microswiss FlowTech Hotend model M3109P.
  • 24V - 60W Heatercore
  • 45,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Creality K2/K2 Plus
Kostenloser Versand
star

68

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • The FlowTech Hotend incorporates Bondtech CHT High Flow Nozzles, achieving a volumetric flow rate of up to 50 mm3/sec. This allows for ultra-fast printing without compromising quality. The nozzles design splits filament flow into multiple chambers, enhancing layer adhesion and reducing gaps between layers.
  • Featuring an integrated nozzle and thermal break, the FlowTech Hotend offers a leak-proof assembly. This design eliminates common issues like filament leakage and simplifies maintenance by allowing cold nozzle changes without the need for hot tightening.
  • Built entirely from metal, the FlowTech Hotend can withstand temperatures up to 350 degrees Celsius. This durability supports a wide range of modern filaments, including those requiring higher extrusion temperatures. Each unit undergoes meticulous in-house machining, assembly, and thermal cycling tests to ensure consistent performance and longevity.
  • Specifically tuned for the Creality K2/K2 Plus, the FlowTech Hotend offers plug-and-play installation. The included NTC thermistor is pre-calibrated, eliminating the need for firmware adjustments and ensuring immediate compatibility.
  • Manufactured in the USA by Micro Swiss, each FlowTech Hotend is subject to rigorous quality control measures. Multiple stages of inspection and a full thermal cycling test guarantee a product that meets high standards of reliability and performance.
  • 89,91 € AUF AMAZON
bambu lab hotend hotend bambu lab micro swiss hotend bambu lab hotend x1c bambu lab x1c hotend bambu lab a1 hotend bambu lab hotend a1 bambu lab hotend heating hotend bambu lab a1 bambu lab lüfter hotend