Geekworm X1001 Pcie To M.2 Nvme Key-m Ssd Shield
Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung:
10. Oktober 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,93 € AUF AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 PCIe to NVMe Base, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
15,01 € AUF AMAZON
Geekworm
Geekworm X1003 PCIe to M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Kostenloser Versand
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【Compatibility】Raspberry Pi 5 PCIe HAT only for Raspberry Pi 5 16GB / 8GB / 4GB, Model: X1003
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
14,00 € AUF AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield für Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top für Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included) Barebones
Kostenloser Versand
91
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
PCIe x1 interface in both Gen2 & Gen3 standards. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow for cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminum Case for N04 & Raspberry Pi 5,refer to ASIN: B0CMZCG8P7
19,99 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
36,58 € AUF AMAZON
Geekworm
Geekworm X1015 PCIe to M.2 NVMe SSD Shield Support Hailo-8 AI Accelerator for Raspberry Pi 5
Kostenloser Versand
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 NVMe Hat only compatible with Raspberry Pi 5, Model: X1015
【Multiple M2 NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation.
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit.
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT included)】Refer to P579 Metal Case (ASIN: B0CRB3DT5M), or P579 Case with official Active Cooler (ASIN: B0CT4P893Q), or P579 with H501 Active Coolr (ASIN: B0D5LCJQZ5)
16,00 € AUF AMAZON
GeeekPi
GeeekPi N05 M.2 M-Key NVMe HAT für Raspberry Pi 5, M.2 2242 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included)
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatibility --- N05 M.2 NVMe to PICe Adapter is designed for Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230 and 2242. Extra custom CNC SSD mount screw, no soldering required.
PCIe Support --- PCIe x1 interface in both Gen2 & Gen3 standards.
PCIe Ultra-Short Signal Lines ---The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
M.2 Standard-Compliant Power System --- Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
All Necessary Accessories Included --- Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
19,99 € AUF AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5,Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD and Pi5 Board Are not Included)
Kostenloser Versand
77
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB 2GB board. Note: Raspberry Pi 5 board is not included
【Support M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power N07 via pogo pins to supplementary power during large data transfer. and the data will transfer via FFC ribben cable with Raspberry Pi 5 via PCIe slot, Recommend to use GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Ventilation hole design provides excellent ventilation airflow for cooling, and also Support Raspberry Pi 5 Active Cooler installation
【Matching Case (NOT include)】For N07 Mini Tower NVME NAS Kit, please refer to ASIN: B0DDWLBPSY; For N07 Metal Case with Official Active Cooler Kit, ASIN: B0DFLVP88L; N07 Metal Case without Active Cooler, ASIN: B0DL5W15RD
18,99 € AUF AMAZON
Geekworm
Geekworm X1011 PCIe to 4PCS M.2 Key-M NVMe SSD Peripheral Board for Raspberry Pi 5 (Not Support RAID)
Kostenloser Versand
73
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only compatible with Raspberry Pi 5
【Support 4pcs M2 NVMe SSDs】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation.
【Support NVMe Boot】Support NVMe boot with eeprom 2024/05/17 version and later version.
【How to Power】Powering via both pogo pins & FFC or DC power jack, ensuring sufficient power supply. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV). Don't power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time!!!
【Packing List】1 x X1011 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable (one as backup), 1x Screws Pack
【Important Notes】1. X1011 does NOT support PCIe 3.0 speed. 2. The X1011 currently does not support all RAID types.
52,80 € AUF AMAZON
Geekworm
Geekworm X1012 PCIe to M.2 HAT NVMe SSD Shield Support PoE for Raspberry Pi 5
Kostenloser Versand
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only compatible with Raspberry Pi 5 SBC (NOT include Raspberry Pi 5), Model: X1012
【PoE Supported】Power over Ethernet and compatible with 802.3af/at Specifications
【M2 NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with standoffs for 2230/2242/2260 SSD installation.
【How to Power】 35-57VDC powering over Ethernet or 40-57Vdc via Auxiliary power jack
【Packing List】1 x X1012 NVMe+POE shield, 2 x PCIe FFC Cable (1pc is for backup), 1 x Screws Pack
【Matching Case(NOT included)】Refer to P579(ASIN:B0CRB3DT5M), but P579 doesn't reserved hole for X1012 DC auxiliary power jack.
37,00 € AUF AMAZON
geekworm x1001 pcie to m.2 nvme key-m ssd shield for raspberry pi 5
geekworm x1001 pcie to m.2 nvme key-m ssd shield for raspberry pi 4
x1001 pcie to m.2 key-m nvme ssd board
pcie m.2 nvme ssd shield
m.2 ssd m key pcie nvme
m.2 key-m nvme ssd
x1001 m.2 nvme ssd
#1 GEWINNER
