main logo

Frostbite Build Plate

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 11. Dezember 2025
BIGTREETECH
BIGTREETECH
BIQU CryoGrip Pro Frostbite Panda Build Plate, Upgrade Build Cold Plate for Bambu-Lab A1 Mini 3D Printer, Double Sided Special Materials Spring Steel Sheet, Room Temperature Print, 184x184mm
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Special Material Texture Printing: CryoGrip Pro frostbite Build plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off
  • Low-Temp with No Glue Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃). Note: ABS and TPU filament are not recommended to be used as they may require the use of a scraper to remove the printed part, which can easily cause damage to its bottom
  • Unparalleled Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
  • Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is suitable for 3D printers with a platform size of 184x184mm, compatible with Bambu-Lab A1 Mini 3D Printer
  • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
  • 32,99 € AUF AMAZON
BIGTREETECH
BIGTREETECH
BIQU CryoGrip Pro Frostbite Panda Build Plate, Upgrade Build Cold Plate for Bambu-Lab P1S/P1P/X1C/X1E/A1 3D Printers, Double Sided Special Materials Spring Steel Sheet,Room Temperature Print,257x257mm
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Special Material Texture Printing: CryoGrip Pro frostbite Build plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off
  • Low-Temp with No Glue Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃).Note: ABS and TPU filament are not recommended to be used as they may require the use of a scraper to remove the printed part, which can easily cause damage to its bottom
  • Unparalleled Adhesion and Zero Heat Generation: Panda Build Plate CryoGrip Pro Frostbite has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
  • Perfect Compatibility: Panda Build Plate CryoGrip Pro Frostbite is suitable for 3D printers with a platform size of 257x257mm, compatible with Bambu-Lab P1P, P1S, X1C, A1.The intricate markings compatible with X1 buildplate locating scan,help verify buildplate type.No need to worry about missing QR code error
  • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
  • 49,99 € AUF AMAZON
BIQU
BIQU
BIQU CryoGrip Pro Frostbite Panda Build Plate für Bambu-Lab P2S/P1S/P1P/X1C/X1E/A1 Drucker, Raum temperatur Druck Kaltplatte 257x257mm, Doppel Seitiges Grobes Texturiertes Federstahlblech
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Perfekte Kompatibilität: CryoGrip Pro Frostbite Panda Build Plate eignet sich für 3D-Drucker mit einer Plattformgröße von 257x257mm, kompatibel mit Bambu-Lab P2S, P1S, P1P, X1C, X1E, A1. Bitte deaktivieren Sie die Funktion "Build Plate Detection" in Ihrer Slicing-Software, wenn Sie sie auf P2S verwenden. Ein AR-Code ist auf der Bauplatte enthalten, um sicherzustellen, dass er vom X1C erkannt wird, was Einrichtungsfehler für ein problemloses Druckerlebnis beseitigt
  • Room Temperture Druck: PLA-Filament kann bei Innentemperatur gedruckt werden und bietet ultrastarke Haftung, mit einem Temperaturbereich von nur 30-50 ℃, spart Heizungsbettzeit, umweltfreundlich, 50% Stromreduktion. Es kann auch für PETG-Filament (50-70 ℃) verwendet werden. Hinweis: ABS- und TPU-Filament werden nicht empfohlen, da sie die Verwendung eines Schabers erfordern können, um das gedruckte Teil zu entfernen, was leicht Schäden an seinem Boden verursachen kann
  • Exzellente Haftung und Null Wärmeerzeugung: CryoGrip Pro Frostbite Panda Build Plate hat perfekte erste Schicht Haftung. Das Substrat hat hohen Magnetismus, starke Adsorption und Fixierung und begrenzt Spannungsververzerrung, so dass es keine Notwendigkeit gibt, sich Sorgen über Druckfehler zu machen, der durch den Abfall der ersten Schicht verursacht wird, was die Druckerfolgsquote erheblich verbessert. Entworfen, um Ihren Druck bei Raumtemperatur sicher zu schützen. Genießen Sie den perfekten Druckeffekt ohne Verzerrung
  • Special Material Texture Printing: CryoGrip Pro Frostbite Build Platte mit 7 Schichten Kobaltoxid Beschichtung, bestehend aus Basisplatte, Base Coat, Zwischenbeschichtung und Top Coat. Die Grundschicht und Zwischenschicht sind jeweils eine hochaktive Haftschicht und eine eisblaue ultra-hohe Temperatur leicht gehärtete Sinterschicht, bringen schlagfest, korrosionsbeständig, lange Lebensdauer
  • Easy zu entfernen: Das gedruckte Modell kann ohne die Notwendigkeit für andere Werkzeuge demontiert werden; Nach dem Biegen kann die Stahlplatte in einen flachen Zustand zurückkehren. Nach längerer Verwendung kann das Wischen mit sauberem Wasser die neue Klebeeffekt leicht wiederherstellen
  • 49,99 € AUF AMAZON
BIGTREETECH
BIGTREETECH
BIQU CryoGrip Pro Frostbite Panda Build Plate, Upgrade Build Cold Plate for K1 MAX 3D Printer, Double Sided Special Materials Spring Steel Sheet, Room Temperature Print, 310x315mm
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Special Material Texture Printing: CryoGrip Pro frostbite Build plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off
  • Low-Temp with No Glue Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃). Note: ABS and TPU filament are not recommended to be used as they may require the use of a scraper to remove the printed part, which can easily cause damage to its bottom
  • Unparalleled Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
  • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
  • Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is suitable for 3D printers with a platform size of 310x315mm, compatible with K1 MAX 3D Printer.
  • 59,99 € AUF AMAZON
BIQU
BIQU
BIQU CryoGrip Pro Frostbite Panda Build Plate For AD5M/5M Pro/K1/K1C/Ender 3 V3 SE/3 V2/3 S1 Pro/3 V2 Neo/3 Pro/Ender 5 Pro/Kobra 2 Pro/Neptune 3 Pro/4 3D Printers 235x235mm, Room Temperature Print
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is suitable for 3D printers with a platform size of 235x235mm, compatible with Adventurer 5M/5M Pro/K1/K1C/Ender 3 V3 SE/3 V2/3 S1 Pro/3 V2 Neo/3 Pro/Ender 5 Pro/Kobra 2 Pro/Neptune 3 Pro/4/SV05/06/07 3D Printers
  • Room Temperture Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃). Note: ABS and TPU filament are not recommended to be used as they may require the use of a scraper to remove the printed part, which can easily cause damage to its bottom
  • Excellent Adhesion & Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has perfect first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
  • Special Material Texture Printing: CryoGrip Pro Frostbite build plate with 7 layers of cobalt oxide coating, consisting of base plate, base coat, intermediate coating and top coat. The base layer and interlayer are each a highly active adhesive layer and an ice blue ultra-high temperature slightly hardened sintered layer, bring impact resistant, corrosion resistant, long service life
  • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
  • 45,99 € AUF AMAZON
BIQU
BIQU
BIQU CryoGrip Pro Frostbite Panda Build Platte für Bambu-Lab H2D/H2S 3D Druckers, kalte Platte Raumtemperatur Druck, doppel seitige grobe texturierte Feder stahl blech, 355x346mm
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Perfekte Kompatibilität: CryoGrip Pro Frostbite Panda Build Plate eignet sich für 3D-Drucker mit einer Plattformgröße von 355x346mm, Druckfläche von 350x325mm. Kompatibel mit Bambu-Lab H2D/H2S 3D-Druckers
  • Room Temperture Druck: PLA-Filament kann bei Innentemperatur gedruckt werden und bietet ultrastarke Haftung, mit einem Temperaturbereich von nur 30-50 ℃, spart Heizungsbettzeit, umweltfreundlich, 50% Stromreduktion. Es kann auch für PETG-Filament (50-70 ℃) verwendet werden. Hinweis: ABS- und TPU-Filament werden nicht empfohlen, da sie die Verwendung eines Schabers erfordern können, um das gedruckte Teil zu entfernen, was leicht Schäden an seinem Boden verursachen kann
  • Exzellente Haftung und Null Wärmeerzeugung: CryoGrip Pro Frostbite Panda Build Plate hat perfekte erste Schicht Haftung. Das Substrat hat hohen Magnetismus, starke Adsorption und Fixierung und begrenzt Spannungsververzerrung, so dass es keine Notwendigkeit gibt, sich Sorgen über Druckfehler zu machen, der durch den Abfall der ersten Schicht verursacht wird, was die Druckerfolgsquote erheblich verbessert. Entworfen, um Ihren Druck bei Raumtemperatur sicher zu schützen. Genießen Sie den perfekten Druckeffekt ohne Verzerrung
  • Special Material Texture Printing: CryoGrip Pro Frostbite Build Platte mit 7 Schichten Kobaltoxid Beschichtung, bestehend aus Basisplatte, Base Coat, Zwischenbeschichtung und Top Coat. Die Grundschicht und Zwischenschicht sind jeweils eine hochaktive Haftschicht und eine eisblaue ultra-hohe Temperatur leicht gehärtete Sinterschicht, bringen schlagfest, korrosionsbeständig, lange Lebensdauer
  • Easy zu entfernen: Das gedruckte Modell kann ohne die Notwendigkeit für andere Werkzeuge demontiert werden; Nach dem Biegen kann die Stahlplatte in einen flachen Zustand zurückkehren. Nach längerer Verwendung kann das Wischen mit sauberem Wasser die neue Klebeeffekt leicht wiederherstellen
  • 75,99 € AUF AMAZON
JUUPINE
JUUPINE
JUUPINE new supertack Frostbite type plates (polyura) 257x257mm for Bambulab P1S/X1/X1C/P1P/P1/A1, special process polyurea coating, low temperature cold printing Cool plate, ultra-high viscosity
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Polyurea texture printing: The printing bed [swamp] 3D printing platform hot bed adopts polyurea oxidation coating technology, with spring steel plate as the base material, and multi-layer polyurea technology superposition optimization composition. The printing plate is corrosion-resistant, high-temperature resistant, durable, and will not cause the risk of coating shedding due to repeated bending. The surface texture is delicate, smooth and soft, making the printing bottom smoother. The viscosity is like a swamp, full of adsorption and flexible.
  • Unparalleled adhesion and low-temperature printing: The Low carbon plate hot bed platform has unparalleled first-layer adhesion. The substrate is a spring steel plate, which is strongly adsorbed on the printing platform to limit stress deformation. Low-temperature printing, super strong viscosity, avoid head wrapping, energy saving and power saving, no need to worry about printing failure or deformation due to the first layer falling off, greatly improving the printing success rate.
  • Cleaning and use: The low-carbon plate printing hot bed platform is polyurea coated, and attention should be paid to dust prevention during daily use. Before use, wipe off the surface dust with a non-woven cloth, or wipe it clean with alcohol. Using the recommended parameters of [Texture PEI Build Plate], the recommended temperature for filament PLA can be set to 30-50 degrees Celsius, and the recommended temperature for PETG is 50-70 degrees Celsius. If the recommended parameters of the newly launched [Low Temperature Warming Build Plate] are used, the recommended temperature can be appropriately reduced by about 10 degrees Celsius. Adjusting the temperature requires debugging.
  • Perfect compatibility: Low carbon plate build plate is suitable for 3D printers with a platform size of 257x257mm, and is compatible with Bambulabs P1P, P1S, X1C, X1E, A1. There is an identification code on the surface, and the x1 series machines with laser scanning function can recognize the automatic leveling hot bed platform.
  • Operation suggestion: It is recommended that you select the default parameters of [Texture PEI] when printing, then select the corresponding consumables, and then modify the printing temperature.
  • 22,35 € AUF AMAZON
JUUPINE
JUUPINE
2025 Upgraded supertack build plate GECO Plate PLA Plate (No Heating) Compatible with Bambu-Lab P1P/P1S/X1C/X1E/A1 3D Printer 257X257mm Magnetic Spring Steel 0℃ Printing Hot Bed
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • 【Double-sided textured GECO printing plate naming design】In 2025, JUUPINE launched a new cold plate exclusively for PLA and named it GECO. As the name suggests, it allows the printed parts to stick to the board like a gecko. GECO is specially made with a frosted texture on the surface. When the filament contacts it, it makes full use of the subtle force between molecules-van der Waals force, to build countless stable microscopic connections, so that the printed parts are firmly formed and "adsorbed" on it tightly like a gecko.
  • 【Built-in QR code】The build plate comes with a QR code, which can be automatically recognized by the Bambulab X1 series 3D printer and automatically level the printing platform. If it is other Bambulab machines, you can set the shutdown recognition, and the cold printing function of the build plate can still be used.
  • 【Heavier】Our GECO is thicker and heavier than ordinary PEI hot beds. Thick and magnetic, it can prevent large prints from warping and small and tall prints from falling over. Flexible, detachable, double-sided design. Durable and easy to use, place the print plate on the hot bed of the Bambu Lab 3D printer, and then the print bed will automatically level when it is turned on. The spring steel plate can be bent, and the model can be quickly removed without the help of other tools. And the board will flatten again.
  • [Excellent adhesion of the first layer of printing] The model can be firmly attached to the GECO surface. Even beginners can print easily. With excellent adhesion, it can exert excellent viscosity at room temperature above 0 degrees without heating the platform. Under 0-degree printing, with less power, the printing task can be completed, and say goodbye to glue and handwriting, eliminating the complicated printing process.
  • [Daily maintenance and use are simpler] Before printing, the build plate can be cleaned with alcohol and soapy water, and after dusting and degreasing handprints, it can be used directly.
  • [Exclusive for PLA use] The GECO surface is not resistant to high temperatures, and heating is prohibited during the printing process. Only PLA exclusive filament can be printed.Only applicable to PLA material. Do not use the original default temperature of PLA. The plate slicing temperature is not allowed to exceed 40 degrees Celsius.
  • 【Compatible with 3D Printers】Our GECO printing plate is suitable for 3D printers with a platform size of 257 x 257mm, such as Bambu Lab X1/X1C/X1E/P1P/P1S/A1 3D printers. Among them, Bambulabs X1 series 3D printers can automatically recognize and level the QR code.
  • 25,15 € AUF AMAZON
JUUPINE
JUUPINE
OMG Cold Build Plate with QR Code Texture PEI Cold Plate for Bambu lab Printing Platform, Carbon Plate 257x257mm Strong Viscosity heatingbed for Bambu lab P2S/P1P/P1S/A1/X1E/X1 3D Printer
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Breakthrough in energy-efficient cold printing technology: JUUPINE's new sky-blue cold printing platform, launched in 2025, features an innovative spray design that enables low-temperature cold printing of a variety of materials. Engineers were amazed and ultimately named it "OMG". We recommend that PLA materials be printed directly at temperatures between 45°C and 55°C, and PETG materials at temperatures between 60°C and 75°C.Applying glue is recommended.
  • Sky Blue Textured Adhesion: The heated platform is constructed of stainless steel and has been specially optimized on both sides. This not only provides exceptional adhesion and cold printing performance, but also aesthetics, resulting in a vibrant sky blue color that allows for a playful display of the sky within a compact footprint. After printing begins, the bottom of the print exhibits a natural, high-quality matte finish, enhancing the aesthetics of the finished product. Please note that the sky blue will not transfer to the bottom of the print; the bottom of your print will be the natural color of the filament, with a slightly textured surface.
  • Compatible with the entire Bambu Lab series: This heated printing platform is compatible with Bambu Lab 3D printers. Its 257x257mm dimensions perfectly fit mainstream printers such as the P2S,X1, A1, P1S, X1C, X1E, and P1P.
  • Extensive material and temperature compatibility: The platform supports printing with a wide range of filaments, from PLA, TPU, and PETG to ABS and nylon. Applying glue is recommended.
  • Easy installation and low maintenance: Simply place the cold print platform on the heated bed and it's ready to go. Simply wipe with water or alcohol before use.
  • 19,51 € AUF AMAZON
Creality
Creality
2025 Creality Official Cold Low Temperature Build Plate, 235x235mm Doppelseitige kalte 3D-Drucker-Bett-Plattformen für Ender 3 V3 SE KE/K1/Ender 3 V3/CR-10 SE/Ender 3 S1 Pro/3 V2 Neo/5 S1 3D-Drucker
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • 【Energiesparendes kühles Drucken】- Keine Hitze für 3D-Drucke erforderlich! Diese 235x235mm kühle Bauplatte reduziert den Energieverbrauch drastisch. PLA bei 45-55°C; TPU Druck bei 35-45°C; PETG bei 50-70°C. Ein revolutionäres 3d-Druckerbett für Bambu Lab. Holen Sie sich ein überlegenes, effizientes 3d-Druckerbett. Niedrigere Rechnungen, schnellere Drucke!
  • 【Easy Demoulding in One Step】- Biegen Sie einfach die 235x235mm Bauplatte nach dem Abkühlen, und Ihr Druck springt ab. Keine Notwendigkeit, mit Werkzeugen zu kratzen! Rüsten Sie Ihr 3D-Druckerbett für eine mühelose Entfernung auf.
  • 【Double-Sided Printing Versatility】- Verdoppeln Sie die Lebensdauer des Drucks! Diese 235x235mm Bauplatte verfügt über eine doppelseitige 3d-Druckerplattform, die den Wert und die Effizienz maximiert. Doppelseitige Harzbeschichtung, eine Platte für zwei Zwecke, extrem kostengünstig.
  • 【Unmatched Adhesion, Superior Resin Coating】 - Mit seinem starken Magnetismus, seiner ausgezeichneten Haftung und seinem verwindungssteifen Design garantiert dieses Substrat eine zuverlässige Verbindung der ersten Schicht für konsistent erfolgreiche Drucke. Ideales 3d Druckbett für PLA, TPU, PETG, auf Ihren Bambu Lab Druckern. Das beste 3d-Druckerbett seiner Klasse.
  • 【Wide Compatibility】 - Speziell entwickelt für Creality Ender3 V3 SE KE/K1/Ender-3 V3/CR-10 SE/Ender-3 S1/Ender-3 S1 Pro/Ender-3 V2 Neo/Ender-5 S1 3D-Drucker. Diese 235x235mm 3D-Drucker-Plattform bietet eine perfekte Passform. Einfache Installation,
  • 【After-sales service】Creality offizielle technische Unterstützung und gute After-Sales-Service bringen Sie eine Erfahrung.
  • 23,99 € AUF AMAZON
frostbite plate build plate bambu build plate 3d build plate magnetic build plate prusa build plate raise3d build plate voron build plate build plate a1 glass build plate