Esp32-s3 Usb
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
8. Dezember 2025
LILYGO
LILYGO T-Dongle-S3 ESP32-S3 TTGO Entwicklungsplatine mit Bildschirm-Dongle 0,95 Zoll ST7735 LCD-Display TF-Karte
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
MCU: ESP32-S3 Xtensa LX7 Mikroprozessor
Drahtlose Konnektivität: Wi-Fi 802.11 b/g/n, Bluetooth5.
Plattform: Arduino-ide、 Plattforml0-ide、 Micropython.
Github:github.com/Xinyuan-LilyGO/T-Dongle-S3
Hinweis: Die virtuelle TF-Karte hat keinen Speicher. Wenn Sie die virtuelle TF-Karte entfernen müssen, legen Sie bitte eine gewöhnliche TF-Karte ein, um die USB-A-Schnittstelle zu schützen. Normale TF-Karte kann die TF-Karte normal verwenden.
29,00 € AUF AMAZON
Waveshare
Waveshare ESP32-GEEK Development Board, Based On ESP32-S3R2 Controller Chip, with 1.14inch 65K Color LCD, Supports WiFi & Bluetooth LE, USB-A Male Port, with White Plastic Case
Kostenloser Versand
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Integrated LCD Screen, TF Card Slot, Boot Button and Other Peripheral interfaces Suitable For Applications Such As Wireless USB Flash Drive, USB WiFi/Bluetooth, USB Dongle Based On ESP32-S3
Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
Built in 512KB SRAM, 384KB ROM, 2MB of on-chip PSRAM, and onboard 16MB Flash memory
Onboard 1.14inch 240×135 pixels 65K color IPS LCD display Integrated 2.4GHz WiFi and Bluetooth LE wireless communication
WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes WiFi supports 1T1R mode with data rate up to 150 Mbps
Bluetooth supports high power mode (20dBm) Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna
Onboard 3PIN UART port, 3PIN GPIO header and 4PIN I2C port Equipped with plastic case and cables
Provides online open-source demo and resources, more convenient for learning and development
17,99 € AUF AMAZON
Waveshare
ESP32-S3 Ethernet Entwicklungsplatine mit 10/100Mbps RJ45 ETH Port, Kamera Schnittstelle, USB Typ-C Port, TF Card Slot, Wi-Fi & Bluetooth Unterstützung, 240MHz Dual-Core-Prozessor
Kostenloser Versand
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
ESP32-S3 ETH development board based on ESP32-S3R8 chip with 32-bit LX7 dual-core processor, capable of running at 240 MHz, supports Wi-Fi and Bluetooth wireless communication, with reliable and efficient wired Ethernet connectivity
Integrated 512KB Static Random-Access Memory, 384KB ROM, 8MB PSRAM and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, with an onboard antenna. Supports switching to use external antenna
Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface, Optional for PoE module (This version doesn't include POE module) to realize Power over Ethernet function (IEEE 802.3af-compliant)
Onboard camera interface, compatible with OV2640, OV5640 and other mainstream cameras for image and video capture. Onboard TF card slot for external TF card storage of pictures or files
Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Compatible with Pico header, onboard multiple peripheral interfaces, offering strong compatibility and expandability
25,91 € AUF AMAZON
Waveshare
Waveshare ESP32-S3 Mini Development Board, Based On ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & BT 5, Castellated Module, Suitable for SMD Applications
Kostenloser Versand
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE)
Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc
Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Integrated with USB serial port full-speed controller, 34 x GPIO pins allows flexibly configuring pin functions
11,80 € AUF AMAZON
iHaospace
iHaospace 2 x ESP32-S3-DevKitC-1 N16R8 Entwicklungsboard ESP32-S3 Dual USB Type-C Mikrocontroller mit 16 MB Externem Flash-Speicher, 8 MB PSRAM, WLAN-Modul und Bluetooth
Kostenloser Versand
87
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Leistungsstarkes Entwicklungsboard: ESP32-S3-DevKitC-1 Board mit ESP32-S3 N16R8 Dual-Core-Mikrocontroller, 16 MB externem Flash und 8 MB PSRAM.
Vielseitige Schnittstellen: Zwei USB Type-C Anschlüsse für Stromversorgung und Datenübertragung. Auch WLAN, Bluetooth und Pins für Mikrocontroller erweitern die Funktionen.
Einfache Programmierung: MIT App Inventor und Arduino ermöglichen eine schnelle Software-Entwicklung für IoT-Projekte. Der Mikrocontroller lässt sich auch in C/C++ programmieren.
Verfügt über 45 GPIO-Pins und eine breite Palette von Kommunikationsschnittstellen mit einer Vielzahl von einzigartigen Hardware-Sicherheitsmechanismen. 2 x I2C Schnittstellen, 2 x I2S Schnittstellen, 4 x SPI Schnittstellen, 3 x UART Schnittstellen, 1 x USB OTG Schnittstelle.
Viele Erweiterungsmöglichkeiten: Neben den internen Sensoren kann das Board mit LCD-Displays, RF-Modulen, Kameras und mehr ergänzt werden.
15,99 € AUF AMAZON
Waveshare
ESP32-GEEK Mini Development Board Based On ESP32-S3R2 Controller Chip,with 1.14inch 65K Color LCD,Supports 2.4GHz WiFi and BLE 5,USB-A,I2C,UART Port,GPIO Header
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
Built in 512KB SRAM, 384KB ROM, 2MB of on-chip PSRAM, and onboard 16MB Flash memory.Onboard 1.14inch 240×135 pixels 65K color IPS LCD display
Integrated 2.4GHz WiFi and Bluetooth LE wireless communication.WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes.WiFi supports 1T1R mode with data rate up to 150 Mbps.Bluetooth supports high power mode (20dBm).Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna
Onboard 3PIN UART port, 3PIN GPIO header and 4PIN I2C port.Equipped with plastic case and cables
Provides online open-source demo and resources, more convenient for learning and development
19,99 € AUF AMAZON
Waveshare
Waveshare ESP32-S3 1.47inch LCD Display Development Board, 72×320, 262K Color, Dual-core Processor Up to 240MHz Frequency, Supports WiFi & BLE 5, with Colorful RGB LED, ESP32 with Display
Kostenloser Versand
79
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BlE 5 (LE), with onboard antenna
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.47inch LCD display, 172×320 resolution, 262K color
Adapting multiple IO interfaces, integrates full-speed USB port Onboard TF card slot for external TF card storage of pictures or files
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
20,99 € AUF AMAZON
Qusedwey
Qusedwey ESP32-S3 ETH Ethernet Development Board ESP32-S3-ETh-Ethernet-Entwicklungsausschuss USB Typ-C-Schnittstelle
77
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Integriertes 512 KB und 384 KB ROM, eingebautes 8 MB PSRAM und 16 MB
Basierend auf dem Hochleistungschip ESP32-S3R8, ausgestattet mit einem 32-Bit-LX7-Dual-Core-Prozessor von Xtensa mit einer Hauptfrequenz von bis zu 240 MHz.
Unterstützt externes PoE- zur Realisierung der Ethernet-Stromversorgungsfunktion (konform mit IEEE 802.3af-Standard). (PoE- nicht im Lieferumfang enthalten).
Unterstützt 2,4 GHz WLAN und Bluetooth 5 (LE), integrierte Antenne, unterstützt externe Antenne, Onboard-W5500-Ethernet-Chip, erweitert 10/100 Mbit/s-Netzwerkverbindung über SPI-Schnittstelle
Integrierte Kameraschnittstelle, kompatibel mit gängigen Kameras wie OV2640 und OV5640, geeignet für die Bild- und Videoaufnahme
21,18 € AUF AMAZON
RUIZHI
RUIZHI 2 Stück für ESP32 S3 ESP32-S3 DevKitC-1-N16R8 Entwicklungsboard mit Dual-Typ-C-Schnittstelle und 2,4-GHz WLAN Bluetooth 5.0 Gelötet kompatibel mit Arduino
Kostenloser Versand
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
🚀 Leistungsstarker ESP32 S3-Chip: Ausgestattet mit ESP32-S3 SoC, Dual-Core-Xtensa LX7-MCU, integriertem 2,4-GHz-WLAN und Bluetooth 5 (LE) ist das esp32s3-Modul ideal für IoT, Smart Devices und Arduino-Projekte.
🎯 KI-Beschleunigung und DSP-Unterstützung: Die Vektorbefehle des ESP32-S3-Boards verbessern die Leistung bei der Berechnung neuronaler Netze, der Bilderkennung, der Sprachaktivierung und der Signalverarbeitung.
🔒 Erweiterte Sicherheitsfunktionen: Das ESP32 S3-Board unterstützt AES-XTS-Flash-Verschlüsselung, RSA-basierten Secure Boot, HMAC und einen Hardware-Zufallszahlengenerator für zuverlässigen Schutz.
⚡ Umfangreiche Schnittstellen und Konnektivität: Mit 45 GPIOs, SPI-, I²C-, I²S-, PWM-, ADC-, UART-, USB-OTG-, CAN-, LCD- und Kamera-Schnittstellen eignet sich das ESP32 S3-Board perfekt für Robotik- und AIoT-Anwendungen.
🔌 Einfache Entwicklung und Arduino-Kompatibilität: Zwei USB-Typ-C-Anschlüsse für die Programmierung (UART/USB), unterstützt durch das ESP-IDF-Framework, einfache Migration von anderen ESP32-Boards.
15,99 € AUF AMAZON
Waveshare
ESP32-S3 1.64 Zoll AMOLED Touch Display Entwicklungsboard, 280×456 Pixel, 16.7M Farbe, QSPI Schnittstelle, Wi-Fi und BLE-5 Unterstützung, mit 6-Achsen IMU, TF Karten Slot, USB, UART, I2C, etc.
Kostenloser Versand
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
ESP32-S3 1.64″ AMOLED touch display development board adopts ESP32-S3R8 chip with 2.4GHz Wi-Fi and Bluetooth BLE 5 support, 32-bit LX7 dual-core processor, up to 240MHz main frequency, built-in 512KB S-RAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
ESP32-S3 with 1.64inch AMOLED screen, QSPI interface, 280 × 456 resolution, 16.7M color, 178° wide viewing angle. Supports capacitive touch function, controlled via I2C interface
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more
Onboard RST button, along with programmable BOOT button for customizable functionality and flexible development. Onboard TF card slot, enabling external storage for pictures or files
Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient. Adapting I2C, UART, and USB interfaces, for connecting peripherals and debugging
32,63 € AUF AMAZON
esp32 s3 usb
esp32-s3-usb
esp32 s3 usb c
esp32-s3-usb-otg
esp32 s3
esp32-s3
esp32 usb
usb esp32
esp32-s3 feather
diymore esp32 s3