Esp32 Lte
Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung:
9. Oktober 2025
Waveshare
Waveshare ESP32-S3 A7670E 4G Development Board, LTE Cat-1 / 2G / WiFi/BT/Telephone Call/SMS/GNSS Positioning Support, Suitable for 4G Portable WiFi, Onboard Camera/Speaker/Antenna
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
Built in 512KB SRAM, 384KB ROM, 2MB of PSRAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance
Equipped with the A7670E-FASE cellular module, supports 4G Cat-1/2G networking, GNSS positioning, telephone calls, SMS, and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of A7670E, suitable for connecting with PC for dial-up internet or debugging of A7670E module
Onboard lithium batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard 18650 batt holder (18650 batt is NOT included), adapting VBAT pin header for connecting to external 3.7V lithium batt, with anti-reverse protection
Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption
61,99 € AUF AMAZON
LILYGO
LILYGO T-SIM7600E-L1C 4G LTE CAT4 USB Dongle Modul ESP32 TTGO Entwicklung Borad 18650 Akkuhalterung Solar Ladeboard
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Pin VIN ist ein USB-Eingang, wenn eine Batterie zur Stromversorgung des Geräts verwendet wird, wird keine Spannung von VIN ausgegeben, d.h. 3,3 V ist der einzige Stromausgang
Der Ein/Aus-Schalter ist nur für den Batteriebetrieb gedacht, er funktioniert nicht, wenn das Gerät an den USB-Anschluss angeschlossen ist.
Die Batteriespannung kann mit dem integrierten BAT ADC(35) nicht ausgelesen werden, wenn das Gerät an USB angeschlossen ist
Wenn eine SD-Karte eingesteckt ist, kann man keine Software in die Arduino IDE hochladen, da die SD-Karte IO2 als CS verwendet; die SD-Karte muss entfernt werden, wenn ein neuer Sketch hochgeladen wird
More Information:github.com/Xinyuan-LilyGO/LilyGO-T-SIM7600X
45,00 € AUF AMAZON
Waveshare
Waveshare ESP32-S3 SIM7670G 4G Development Board, LTE Cat-1 / WiFi/BT/GNSS Positioning Support, Global Coverage Multi Band, Suitable for 4G Portable WiFi, Onboard Camera/Antenna
Kostenloser Versand
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
Built in 512KB SRAM, 384KB ROM, 2MB of PSRAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance
Equipped with the SIM7670G cellular module, supports 4G Cat-1 networking, GNSS positioning and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of SIM7670G, suitable for connecting with PC for dial-up internet or debugging of SIM7670G module
Onboard lithium batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard 18650 batt holder (18650 batt is NOT included), adapting VBAT pin header for connecting to external 3.7V lithium batt, with anti-reverse protection
Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption
68,99 € AUF AMAZON
LILYGO
LILYGO T-SIM7000G Solar Ladegerät ESP32-WROVER-B Chip 2G(GSM) NB SIM GPS Antenne CH9102F 16MB TTGO Entwicklungsboard Modul
Kostenloser Versand
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【Produktbeschreibung】16MB Flash und 8M PSRAM
【Hinweis】SIM7000G unterstützt kein 4G-Netzwerk. Bitte stellen Sie sicher, dass die von Ihnen verwendete USIM-Karte 2G(GSM)/NB-IOT-Zugang unterstützt
【Peripherie-Schnittstellen】I2C , SPI , UART , SDIO , I2S , CAN
【Mehr Informationen】github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G
【Produktservice】Wenn Sie Fragen zu unseren Produkten haben, können Sie uns gerne kontaktieren
63,00 € AUF AMAZON
Skript Verlag Kühnel
Walter: Kompaktes IoT-Modul mit ESP32-S3 und LTE-M/NB-IoT-Modem
Kostenloser Versand
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
LILYGO
LILYGO T-SIM7600G-H 16MB ESP32-WROVER 18560 Batteriehalter Solar Charge ESP32 TTGO Entwicklungsplatine
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
T-SIM7600 ist ein drahtloses Netzwerkmodul mit WLAN/Bluetooth/4G LTE CAT4 GPS
Auf dieser Basis integrieren wir einen 18650 Batteriehalter und fügen eine Solarladeschnittstelle hinzu
Um die Verwendung verschiedener Anwendungsszenarien zu erleichtern, sind zwei T-Typ-C-Schnittstellen auf der Entwicklungsplatine reserviert
GPS-Leistungssteuerung, reduziert den Stromverbrauch, der niedrigste erreicht 300 uA beim Schlafen
Github: github.com/Xinyuan-LilyGO/T-SIM7600X
69,00 € AUF AMAZON
Gugxiom
ESP32 S3 A7670E 4G-Entwicklungsplatine, Multifunktionaler Hochleistungs-Mikrocontroller mit A7670E 4G-Modul, WLAN, BLE5.0, 16 MB Flash, 2 MB PSRAM
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
[Erhöhte Sicherheit]: Hardware-Verschlüsselung, RNG, HMac und digitale Signaturmodule bieten sichere Verbindungen für IoT-Anwendungen.
[Verbesserte Konnektivität]: Verfügt über esp32 s3r2 mit WLAN mit geringem Stromverbrauch, BLE5.0, 16 MB Flash und 2 MB PSRAM für verbesserte Konnektivität.
[Vielseitiger Mikrocontroller]: Das Entwicklungsboard esp32 s3 a7670e 4g von ist ein Hochleistungsboard mit multifunktionalen Funktionen.
[Erweiterte Funktionen]: Ausgestattet mit einem 4G-Modul a7670e, einer OV-Kameraschnittstelle, RGB-Beleuchtung und mehr für erweiterte Funktionen und zusätzliche Funktionen.
[Ideal für IoT-Anwendungen]: Das a7670e 4G-Modul ermöglicht mobile Netzwerkkonnektivität und ist somit für IoT-, Außenüberwachungs- und Smart-Home-Anwendungen geeignet.
34,31 € AUF AMAZON
diymore
diymore für ESP32 LoRa Entwicklungsplatine mit OLED Display und Antenne Typ C Dual-Core IOT Board 240MHz Bluetooth WiFi Modul CP2012 1262 863 928MHz
Kostenloser Versand
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Mikroprozessor: für ESP32-S3FN8 (Xtensa 32-Bit LX7 Dual-Core-Prozessor, fünfstufige Pipeline-Rack-Struktur, Hauptfrequenz bis zu 240 MHz).1262 LoRa Node Chip
Typ-C USB-Schnittstelle mit einem kompletten Spannungsregler, ESD-Schutz, Kurzschlussschutz, RF-Abschirmung und anderen Schutzmaßnahmen.
Integriertes WiFi, LoRa, Bluetooth drei Netzwerkverbindungen, onboard Wi-Fi, Bluetooth dedizierte 2,4 GHz Metallfederantenne, reservierte IPEX (U.FL) Schnittstelle für LoRa verwenden
Onboard 0,96 Zoll 128 x 64 Punktmatrix-OLED-Display, das verwendet werden kann, um Debuging-Informationen, Batteriebetrieb und andere Informationen anzuzeigen.
Integrierter CP2102 Typ C auf seriellen Port-Chip, bequem für Programm-Downloads, Debugging von Informationsdruck
24,98 € AUF AMAZON
Komdndht
Komdndht ESP32-S3 A7670E 4G Entwicklungsplatine PCB-Computerzubehör Unterstützt 4G LTE Cat-1/2G, Bluetooth 5, GNSS-Positionierung und WiFi-Entwicklungsplatine, 500452879
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
Waveshare
Waveshare A7670E LTE Cat-1 HAT for Raspberry Pi Enabling LTE Cat-1 / 2G Communication & LBS Positioning Multi Band Support 2G GSM/GPRS
Kostenloser Versand
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL.
Supports dial-up, telephone call, SMS. Supports LBS base station positioning, it is able to get the approximate position info via mobile network.
TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words. Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. 2x LED indicators, easy to monitor the operating status.
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
38,99 € AUF AMAZON
lte esp32
esp32 4g lte
lte modul esp32
esp32 lte sim
esp32 lte module
esp32
lte