main logo

Epaper Touch

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 9. Dezember 2025
Waveshare
Waveshare
Waveshare 2.9inch Touch E-Paper E-Ink Display HAT for Raspberry Pi 5-Points Capacitive Touch 296×128 Pixels Black and White Partial Refresh Support SPI Interface
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • 2.9inch capacitive touch ePaper module, 296×128 resolution. 5-points touch support, user-defined wakeup gesture.
  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • Reversed control interface, for connecting with controller boards like STM32, etc. Comes with development resources and manual (examples for Raspberry Pi).
  • 34,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 36,99 € AUF AMAZON
Waveshare
Waveshare
2.9 Zoll e-Paper Touch Display für Raspberry Pi Pico 296×128 E-Ink Touchscreen Anzeigemodul Zweifarbig Schwarz/Weiß 3.3V Unterstützung 5-Punkte-Touch SPI / I2C-Schnittstelle Teilaktualisierung
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • 2.9 inch Touch e-Paper Module for Raspberry Pi Pico, 296×128 resolution, black / white E-Ink display, onboard female pin header for direct attaching to Raspberry Pi Pico
  • 2.9 inch capacitive touch ePaper module support 5-points touch, toughened glass touch panel, user-defined wakeup gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI Communication / I2C Touch Port interface, requires minimal IO pins
  • 29,99 € AUF AMAZON
LILYGO
LILYGO
LILYGO T5-4.7-S3 E-Paper Pro ESP32-S3 SX1262 LoRa 868Mhz TF Card RTC TTGO Entwicklungsboard mit 4,7-Zoll Ultra-Low Power Touchable E-Paper Display (Mit GPS)
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • T5-4.7-S3 E-Paper Pro ist eine verbesserte Version des T5-4.7 E-Paper, die mit einem ESP32-S3 Host-Controller ausgestattet ist.
  • T5-4.7-S3 E-Paper Pro unterstützt TF-Karte, LoRa, RTC, Touch-Funktion und einen eingebauten 1500mAh Akku.
  • T5-4.7-S3 E-Paper Pro unterstützt MagSafe-Ladegerät, EPDIY-Treiber mit GPS [L76K].
  • Github : github.com/Xinyuan-LilyGO/T5S3-4.7-e-paper-P
  • Wenn Sie Fragen oder Anregungen zu diesem Produkt haben, können Sie uns gerne kontaktieren. Wir werden Ihre Frage so schnell wie möglich beantworten.
  • 90,00 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Kostenloser Versand
star

85

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 66,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
Coolwell
Coolwell
2.13inch Touch E-Paper E-Ink Display Module for Raspberry Pi Zero/Zero W, with ABS Protection Case, 5-Point Touch,250×122 Pixels
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  • Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • 35,51 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT for Raspberry Pi Black/White Color 250×122 Pixels, Support Partial/Full Refresh 5-Point Capacitive Touch with SPI Interface
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels,Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down,Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • 31,99 € AUF AMAZON
Waveshare
Waveshare
2.9 Zoll Touch E-Paper E-Ink Display HAT für Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH 296×128 EINK Bildschirm Display HAT Unterstützung 5-Punkte Touch 3.3V/5V SPI Interface Partial Refresh
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • 2.9 inch touch e-Paper display HAT two-color E-Ink touchscreen display for Raspberry Pi, 296×128 pixels, support 5-points capacitive touch, user-defined wakeup gesture
  • Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, reversed control interface, I2C bus for touch panel, SPI bus for display, for connecting with controller boards like Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, touch control power supply configuration, basically power is only required for refreshing
  • Support partial refresh, low power, wide viewing angle, paper-like effect, ideal for price tags, shelf labels, industrial instruments etc.
  • 33,96 € AUF AMAZON
LILYGO
LILYGO
LILYGO T5-4.7-S3 4.7 Zoll E-Paper ESP32-S3-WROOM-1 TTGO Entwicklungsboard für Arduino
star

64

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • 【MCU】ESP32-S3-WROOM-1-N16R8
  • 【Screen】Ohne Touch-Funktion
  • 【Programmierumgebung】 Arduino-IDE, VS Code
  • 【Github】github.com/Xinyuan-LilyGO/LilyGo-EPD47/tree/esp32s3
  • 【Produktservice】Wenn Sie irgendwelche Fragen oder Vorschläge zum Produkt haben, können Sie uns gerne kontaktieren. Wir werden Ihre Frage so schnell wie möglich beantworten.
  • 47,84 € AUF AMAZON
epaper display touch epaper touch display epaper