main logo

Epaper Raspberry

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 13. Dezember 2025
IBest
IBest
2.9inch E-Paper Module 296x128 Resolution 3.3V/5V Two-Color E-Ink Display Module epaper Screen SPI Interface for Raspberry Pi/Arduino/Nucleo Support Partial Refresh
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 22,79 € AUF AMAZON
IBest
IBest
waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,15 € AUF AMAZON
IBest
IBest
1.54inch E-Paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-Ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 19,32 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Universal e-Paper Driver HAT Supports Various SPI E-Paper Raw Panels Compatible with Raspberry Pi and Jetson Nano
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels
  • This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 14,99 € AUF AMAZON
xicoolee
xicoolee
1.54 Inch E-Paper Display Three Color EPaper Screen for Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixels Red Black White SPI Interface E-Ink
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 1.54inch E-ink display for Raspberry Pi, 200 * 200 pixels, can display three colors: red, black, and white
  • 1.54 inch eink screen, SPI interface, minimal pin usage
  • 1.54 inch e-paper module, onboard Voltage Translator, compatible with both 3.3V and 5V microcontroller interfaces
  • Color E paper display, open-source example programs available for Raspberry Pi, Arduino, STM32 and ESP32 development boards
  • 18,95 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.15inch e-Paper Display (B), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico W and Jetson Nano RDK X3, 296x160, Red/Black/White, SPI Interface with Driver Board
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 22,99 € AUF AMAZON
Coolwell
Coolwell
Coolwell 7.5 Inch E-Paper Display HAT Module 800x480 E-Ink Three-Color Paper Screen for Raspberry Pi/Jetson Nano/Arduino SPI Interface with WiFi/Bluetooth ESP32 Driver Board
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Three color 7.5 inch epaper display, no backlight, keeps displaying last content for a long time even when power down
  • 7.5 eink module, ultra low power consumption, basically power is only required for refreshing
  • Onboard ESP32, supports Arduino development; Provides Android APP, allows to refresh display content via Bluetooth EDR
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
  • Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B); www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
  • 72,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
star

72

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € AUF AMAZON
Coolwell
Coolwell
3.7inch e-Paper HAT+ Display (G), E-Ink Screen, 416x240 Resolution, Red/Yellow/Black/White, SPI Interface, Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32, ESP32
star

68

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • ✔️ Ultra Low Power Consumption & Long-lasting Display: The 3.7" e-Paper display uses E-Ink technology, providing a paper-like effect without the need for backlight. It retains the last displayed content even when powered off, making it ideal for low-power applications like price tags or shelf labels.
  • 🌱 Wide Compatibility with Popular Boards: This e-Paper HAT+ is compatible with multiple platforms including Rasp-berry Pi, Jetson Nano, Ar-duino, STM32, and ESP32. It connects easily to your controller boards using the SPI interface and standard 40PIN GPIO header.
  • ✔️ Vibrant Color Options: The 3.7" E-Ink display offers vivid Red, Yellow, Black, and White colors, allowing you to create visually engaging projects with an ultra-low power footprint. Perfect for industrial applications and creative DIY projects.
  • 🌱 Onboard Voltage Translator for Flexibility: Equipped with an onboard voltage translator, this display is compatible with both 3.3V and 5V MCUs, offering flexibility for various microcontroller setups.
  • ✔️ Easy-to-Use with Online Resources: The product comes with comprehensive online resources, including manuals and development examples tailored for Raspberry Pi, Jetson Nano, Arduino, STM32, and ESP32. This makes integration with your projects seamless and hassle-free.
  • 31,67 € AUF AMAZON
raspberry epaper epaper raspberry pi raspberry pi epaper raspberry epaper display raspberry pi raspberry pi epaper display