main logo

E Ink Raspberry

Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung: 8. Juni 2025
IBest
IBest
waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,15 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 22,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch E-Paper Display HAT, V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Kostenloser Versand
star

88

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. But incompatible with Netatmo.Onboard voltage translator, for 3.3V/5V MCUs.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Kostenloser Versand
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 66,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
Kostenloser Versand
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 36,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Kostenloser Versand
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,but incompatible with Netatmo
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
Kostenloser Versand
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Display HAT Module 800×480 E-Ink Electronic Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)
Kostenloser Versand
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
  • Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
  • 72,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare 264x176 Resolution 2.7 Inch e-Paper Display HAT E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W/Arduino/STM32/Jetson Nano
Kostenloser Versand
star

65

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Onboard 4x Keys; Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download link: www.waveshare.com/wiki/2.7inch_e-Paper_HAT
  • 23,99 € AUF AMAZON
raspberry e-ink e ink raspberry pi e-ink raspberry pi raspberry pi e ink e ink display raspberry e-ink display raspberry e ink e-ink raspberry pi e ink monitor e ink display raspberry pi