main logo

E Ink Displays

Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung: 12. Juni 2025
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen with Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable for Price Tag, Asset/Equipment Tag, Shelf Label...
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Kostenloser Versand
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 66,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
SEENGREAT
SEENGREAT
SEENGREAT 7.3 Zoll 7-Farben E-Paper Display für Raspberry Pi/Arduino/STM32, 800x480 Pixel, mit Treiberplatine und PH2.0-Anschlusskabel
Kostenloser Versand
star

88

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • 7.3″ ACeP e-Paper module, 800x480 pixels resolution, displays in seven colors: black, white, red, green, blue, yellow, and orange
  • 7.3 inch eink display, very low power consumption, only consumes power during refresh
  • 7.3 inch epaper, onboard Voltage Translator, compatible with 3.3V and 5V level interfaces; Equipped with two buttons and two LEDs ,Convenient for users to expand
  • 7.3 inch e-paper display, designed based on the Raspberry Pi 40PIN GPIO interface, suitable for Raspberry Pi series boards; Reserved SPI communication interface for easy connection to Arduino/STM32 and other microcontroller boards
  • 7.3 inch e-paper for Arduino, provides open-source example programs for Raspberry Pi, Arduino, and STM32 development boards
  • 83,90 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Kostenloser Versand
star

85

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 22,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.3inch ACeP 7-Color E-Paper with Solid Wood Photo Frame, Ultra-Long Standby, 800x480 Resolution, Suitable for Content Displays, Calendars, Paintings, Posters, Batteries Are not Included
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Note:3.7V Lithium battery and Button cell are not included.
  • Advanced Color ePaper (ACeP) technology, supports 7-Color display. Ultra-low power consumption, basically power is only required for refreshing.
  • Onboard power saving circuit, allows thousand times of refreshing by one charge
  • Onboard RTC chip for timing refresh. Simple solid wood photo frame, elegant and beautiful
  • Rotatable stand and hook hanger on the back, not limited to usage scenarios. Open source code, more freedom to customize functions
  • 103,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 13.3inch E Ink Spectra 6 (E6) Full Color E-Paper Display with HAT+ Standard Driver HAT, 1600x1200 Pixels, SPI Communication, E-Ink Display
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • E-Paper Display With HAT+ Standard Driver HAT(Features improved interoperability). Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
  • Comes with e-Paper Driver HAT: Features Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards. Onboard voltage translator, compatible with 3.3V / 5V MCUs. Adapting SPI interface for Raspberry Pi/ESP32/STM32, etc
  • Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Can provide with online development resources and manual (e-Paper driver HAT circuit diagram, examples for Raspberry Pi/ESP32/STM32)
  • 362,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Display HAT Module 800×480 E-Ink Electronic Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)
Kostenloser Versand
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
  • Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
  • 72,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
Kostenloser Versand
star

72

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € AUF AMAZON
Binghe
Binghe
2.13" E-Ink LoRa Display Binghe 2.13" E-Ink LoRa Display mit ESP-32-S3 LoRa Entwicklungsplatine mit Acryl-Platte/Batteriekabel/Klebestift Antenne Unterstützt WIFILORA Bluetooth Kompatibel mit Arduino
Kostenloser Versand
star

64

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • 【Kerntechnologie und Vielseitigkeit】: ESP-32-S3 LoRa Modul integriert mit ESP-32-S3FN8 und 1262 Chips, unterstützt WiFi, LoRa und Bluetooth für flexible Entwicklungsoptionen, kompatibel mit meshtastick.
  • 【Hochwertiges Display】: ESP-32-S3 LoRa mit 250x122 Schwarz-Weiß-Pixel-Display mit hohem Kontrast, hoher Reflektivität und ultraweitem Betrachtungswinkel für klare Sicht bei verschiedenen Lichtverhältnissen.
  • 【Niedriger Stromverbrauch】: Das ESP-32-S3 LoRa Board mit 2,13“ E-Ink Display unterstützt USB und Lithium-Batterien als Stromversorgung. Die Anzeige der Inhalte hält über 180 Tage nach dem Ausschalten.
  • 【Kompatibel mit mehreren Stromversorgungen】: 2.13 E-Ink ESP-32-S3 LoRa unterstützt Type-C- und Lithium-Batterie-Schnittstellen mit einem Spannungsbereich von 3-5V, was eine stabile Stromversorgung in verschiedenen Umgebungen gewährleistet.
  • 【Eingebaute Aktualisierungsfunktion】: 2.13 schwarz weißes E-Licht ist mit einer eingebauten Teilbildschirm-Aktualisierungsfunktion ausgestattet, die schnelle Aktualisierungen mit reduziertem Zeit- und Energieaufwand für die vollständige Aktualisierung ermöglicht.
  • 26,99 € AUF AMAZON
e-ink-displays e ink e-ink e ink notepad e ink notes e-ink notepad e ink armbanduhr e-ink armbanduhr e ink tablet e-ink tablet