main logo

E Ink Display 32 Zoll

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 10. Dezember 2025
Samsung
Samsung
Samsung EM32DX 81 cm 32 Zoll Diagonalklasse EMDX series e-Paper Display E Ink Spectra 6 Digital Signage Tizen OS 1440p Quad HD 2560 x 1440 PoE Grau-Weiß
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
SEENGREAT
SEENGREAT
SeenGreat 1.54 Inch E-Ink Display Three Color E-Paper Screen for Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixels Red Black White SPI Interface
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 1.54inch Epaper display for Raspberry Pi, 200 * 200 pixels, can display three colors: red, black, and white
  • 1.54 inch eink screen, SPI interface, minimal pin usage
  • 1.54 inch e-paper module, onboard Voltage Translator, compatible with both 3.3V and 5V microcontroller interfaces
  • Color E paper display, open-source example programs available for Raspberry Pi, Arduino, STM32 and ESP32 development boards
  • 18,95 € AUF AMAZON
DIYmalls
DIYmalls
DIYmalls 2,8 Zoll ESP32 Display JC2432W328C kapazitiver Touchscreen 240x320 TFT LCD Modul ESP-32 Entwicklungsplatine ST7789 + Acrylgehäuse transparent, nicht ESP32-2432S028R
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Das JC2432W328C-Modul ist die Kombination aus ESP-32-Entwicklungsplatine + 2,8 Zoll kapazitivem Touchscreen-Display.
  • Unterstützt das Hochladen von Code auf den 7,1 cm (2,8 Zoll) esp-32-Touchscreen über IDE oder esp32-Flash-Tool.
  • Es wird empfohlen, dieses esp32-Display 2,8 Zoll über einen 5-V-Netzadapter mit Strom zu versorgen, nicht PC.
  • Kommt mit 1 x ES32-Display (7,1 cm), 1 x 1,25 mm 4-poliger auf Dupont-Buchse und 1 x Gehäuse für JC2432W328C.
  • Benutzerhandbuch verfügbar, wenn Sie wie folgt vorgehen: Klicken Sie auf "DIYmalls" (Sie finden "Verkauft von DIYmalls" unter "Jetzt kaufen"-Taste), klicken Sie auf der neuen Seite auf "Fragen stellen".
  • 25,63 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
xicoolee
xicoolee
7.5inch E-Paper Display 800x480 Resolution, SPI Interface E-Ink Screen for Raspberry Pi, Arduino, STM32, ESP32 - Monochrome HAT with Partial Refresh & Open-Source Code
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • High-Resolution E-Ink Display – 7.5-inch monochrome E-Paper screen with 800x480 resolution, delivering crisp text and graphics for e-books, digital signage, industrial labels, and IoT projects.
  • Fits Raspberry Pi & Multi-Board – Designed for Raspberry Pi 40-pin GPIO (all models) and pre-configured SPI interface for Arduino, STM32, and ESP32 integration. Level-shifting chip supports 3.3V/5V microcontrollers.
  • SPI Communication & Partial Refresh – Optimized SPI interface minimizes pin usage and enables fast full/partial refresh modes to reduce power consumption and screen flickering.
  • Open-Source Development Support – Includes ready-to-use C/Python code for Raspberry Pi and Arduino/STM32/ESP32 examples for drawing shapes, text, and images. Ideal for DIY and industrial prototyping.
  • Versatile E-Paper Applications – Perfect for e-readers, smart price tags, logistics labels, conference nameplates, electronic memos, and energy-efficient digital billboards.
  • 59,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Note:New Version please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 29,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 12.48inch E-Ink Display Module 1304×984 Resolution with Embedded Controller SPI Interface Red/Black/White Three-Color E-Paper Display Screen
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. ESP32 control header, allows directly plugging control boards like e-Paper ESP32 Driver Board / ESP32-DevKitC.
  • SPI control interface, for working with STM32 or other MCU host boards. Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • Acrylic protective case, keeping the screen safe, nice looking. Comes with development resources and manual (examples for Raspberry P/STM32/ESP32).
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 248,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module(B) Kit 400x300 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi/Jetson Nano/Arduino/STM32 via SPI Interface
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • 45,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € AUF AMAZON
IBest
IBest
1.54inch E-Paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-Ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface
star

66

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 19,32 € AUF AMAZON
e ink display 32 e-ink display 10 zoll e-ink display 13 zoll e ink display 14 zoll 32 zoll display display 32 zoll e ink display e-ink display lg display 32 zoll e ink display nfc