main logo

Dlg Rc

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 14. Dezember 2025
VLIZO
VLIZO
GzxLaY [Fernbedienung Spielzeugteile] Nasenkegel for Mini Dlg rc. Segelflugzeug - sievironmentell freundliche Materialien
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Exquisite Verarbeitung, genaue Installationsposition, einfacher und einfacher, um sie zu ersetzen und zu zerlegen
  • Beschädigte Teile können perfekt ersetzt werden, um Ihre Maschine zu arbeiten
  • Aus hochwertigen Materialien, harmlos bis menschlichem Körper und Maschine, längere Zeit
  • Die strengen Prüfung erfolgt vor dem Verlassen der Fabrik, um sicherzustellen, dass jedes Produkt von hoher Qualität ist
  • Sie erhalten, was auf dem Bild angezeigt wird, bitte überprüfen Sie, bevor Sie die Bestellung angeben, um sicherzustellen, dass Sie es tun, was Sie brauchen
  • 49,35 € AUF AMAZON
Arkai
Arkai
Powerbar Lipo Akku - 1100 mAh - 3,7V - 1S - 25C/50C geeignet für SAL,DLG u. HLG-Flieger
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Nennspannung: 3,7 V.
  • Zellenanzahl: 1
  • Kapazität: 1100MAH
  • Ca. Maße: 52 mm x 30 mm x 9,3 mm Gewicht: 28 g
  • Bec-Verbindungsstück
  • 11,75 € AUF AMAZON
ptk
ptk
PTK 7308 MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (180°)
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Micro High-Torque Power Core：PTK 7308 with Coreless motor. 3.8V stall 2.6kg.cm (0.175s/60°); 6.0V 3.0kg.cm (0.083s/60°); 8.4V up to 3.5kg.cm (0.065s/60°). Rated 0.9kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise, fits high-torque & high-speed power needs of ultra-micro devices.
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 8.8g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous high-torque power for ultra-micro scenarios, avoiding control delay under high load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro device parameters.
  • Ultra-Micro Scene Adaptation：23.5×8×16.6mm, 8.8g, suitable for micro aircraft control surfaces, mini RC toys, ultra-small robot drive joints, easy installation, matches "ultra-light micro + high-torque programmable + dual-bearing stability" core needs.
  • 35,92 € AUF AMAZON
ptk
ptk
PTK 7308P MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (180°)
star

91

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Micro Ultra-High Torque Power Core (Plus Upgrade)：PTK 7308plus with Coreless motor. 8.4V stall up to 5.2kg.cm (0.06s/60°), rated 1.4kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise. Torque significantly improved compared to basic version, fits high-load & high-speed power needs of ultra-micro devices.v
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 10g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous strong power for ultra-micro high-load scenarios, avoiding control delay under heavy load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro high-load device parameters.
  • Ultra-Micro High-Load Scene Adaptation：23.5×8×16.5mm, 10g, suitable for micro aircraft load-bearing control surfaces, mini RC toy drive parts, ultra-small robot heavy-load joints, easy installation, matches "ultra-light micro + Plus-level high-torque programmable + dual-bearing stability" core needs.
  • 37,64 € AUF AMAZON
ptk
ptk
PTK 7308 MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (360°)
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Micro High-Torque Power Core：PTK 7308 with Coreless motor. 3.8V stall 2.6kg.cm (0.175s/60°); 6.0V 3.0kg.cm (0.083s/60°); 8.4V up to 3.5kg.cm (0.065s/60°). Rated 0.9kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise, fits high-torque & high-speed power needs of ultra-micro devices.
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 8.8g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous high-torque power for ultra-micro scenarios, avoiding control delay under high load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro device parameters.
  • Ultra-Micro Scene Adaptation：23.5×8×16.6mm, 8.8g, suitable for micro aircraft control surfaces, mini RC toys, ultra-small robot drive joints, easy installation, matches "ultra-light micro + high-torque programmable + dual-bearing stability" core needs.
  • 41,94 € AUF AMAZON
ptk
ptk
PTK 7308 MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (90°)
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Micro High-Torque Power Core：PTK 7308 with Coreless motor. 3.8V stall 2.6kg.cm (0.175s/60°); 6.0V 3.0kg.cm (0.083s/60°); 8.4V up to 3.5kg.cm (0.065s/60°). Rated 0.9kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise, fits high-torque & high-speed power needs of ultra-micro devices.
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 8.8g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous high-torque power for ultra-micro scenarios, avoiding control delay under high load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro device parameters.
  • Ultra-Micro Scene Adaptation：23.5×8×16.6mm, 8.8g, suitable for micro aircraft control surfaces, mini RC toys, ultra-small robot drive joints, easy installation, matches "ultra-light micro + high-torque programmable + dual-bearing stability" core needs.
  • 35,92 € AUF AMAZON
ptk
ptk
PTK 7308P MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (270°)
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Micro Ultra-High Torque Power Core (Plus Upgrade)：PTK 7308plus with Coreless motor. 8.4V stall up to 5.2kg.cm (0.06s/60°), rated 1.4kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise. Torque significantly improved compared to basic version, fits high-load & high-speed power needs of ultra-micro devices.v
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 10g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous strong power for ultra-micro high-load scenarios, avoiding control delay under heavy load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro high-load device parameters.
  • Ultra-Micro High-Load Scene Adaptation：23.5×8×16.5mm, 10g, suitable for micro aircraft load-bearing control surfaces, mini RC toy drive parts, ultra-small robot heavy-load joints, easy installation, matches "ultra-light micro + Plus-level high-torque programmable + dual-bearing stability" core needs.
  • 37,64 € AUF AMAZON
ptk
ptk
PTK 7308P MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (300°)
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Micro Ultra-High Torque Power Core (Plus Upgrade)：PTK 7308plus with Coreless motor. 8.4V stall up to 5.2kg.cm (0.06s/60°), rated 1.4kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise. Torque significantly improved compared to basic version, fits high-load & high-speed power needs of ultra-micro devices.v
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 10g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous strong power for ultra-micro high-load scenarios, avoiding control delay under heavy load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro high-load device parameters.
  • Ultra-Micro High-Load Scene Adaptation：23.5×8×16.5mm, 10g, suitable for micro aircraft load-bearing control surfaces, mini RC toy drive parts, ultra-small robot heavy-load joints, easy installation, matches "ultra-light micro + Plus-level high-torque programmable + dual-bearing stability" core needs.
  • 37,64 € AUF AMAZON
ptk
ptk
PTK 7308H MG-D 8g servo Wholesale Digital Metal Tooth Metal Case Model Airplane DLG, Glider Aircraft servo (6pcs)
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Micro High-Torque Power Core：PTK 7308H with Coreless motor. 3.8V stall 2.6kg.cm (0.175s/60°); 6.0V 3.0kg.cm (0.083s/60°); 8.4V up to 3.5kg.cm (0.065s/60°). Rated 0.9kg.cm@8.4V. 2μs dead band, 1520μs/333hz frequency, ±60° wide travel, precise low-noise, fits high-torque & high-speed power needs of ultra-micro devices.
  • CNC Shell + Metal Gears：Wear-resistant Metal Gears, suitable for high-frequency heavy-load use in ultra-micro scenarios; 8.8g CNC shell, lightweight with strong protection, anti-light vibration, fits non-watery micro aircraft, mini robots, balancing portability and durability.
  • Dual-Bearing Stable Output：Precision assembly with 2 ball bearings reduces wear, smoother transmission without jamming; 3.8V-8.4V wide-voltage circuit, stable under fluctuation, provides continuous high-torque power for ultra-micro scenarios, avoiding control delay under high load.
  • Programmer Function + Short Harness：Supports programmer (sold separately) for torque/speed adjustment. 185mm JR connector harness, compatible with most ultra-micro models, compact wiring, easy for beginners to debug micro device parameters.
  • Ultra-Micro Scene Adaptation：23.5×8×16.6mm, 8.8g, suitable for micro aircraft control surfaces, mini RC toys, ultra-small robot drive joints, easy installation, matches "ultra-light micro + high-torque programmable + dual-bearing stability" core needs.
  • 210,37 € AUF AMAZON
ZHRCFUN
ZHRCFUN
ZHRCFUN 4 Stück CNC RC Beadlock Felgen Wheel Rims für Losi 1/6 Super Baja Rey 2.0 RC Truck Upgrade Zubehör
star

65

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Passend für Losi 1/6 Super Baja Rey 2.0 RC Truck
  • Material: Aluminiumlegierung, hochwertig verarbeitet, robust und langlebig
  • Stilvolle Optik: Unsere Räder zeichnen sich durch ein elegantes und auffälliges Design aus und heben Ihr Fahrzeug von der Masse ab
  • Präzise CNC-gefräst, einfaches Aufrüsten von alten und defekten Teilen
  • Lieferumfang: 4 Stück Felgen, Gesamtgewicht: 976g. Schweres Material verbessert die Gesamtleistung
  • 129,99 € AUF AMAZON
rc dlg dlg rc glider rc dlg glider rc