Color Oled
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
10. Dezember 2025
LAFVIN
LAFVIN 4.0 inch TFT LCD Touch Display Shield Module 480x320 SPI Serial ST7796S with Touch Pen Compatible with Arduino
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
4.0 inch color screen,support 65K color display,display rich colors.
480X320 resolution, optional touch function.
Using the SPI serial bus, it only takes a few IOS to illuminate the display.
Easy to expand the experiment with SD card slot.
Provide underlying driver technical support.
18,99 € AUF AMAZON
Waveshare
Waveshare 1.5inch RGB OLED Display Module 128x128 Pixels 16-bit High Color SPI Interface with Embedded Controller
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Driver: 1351; Interface: 4-wire SPI, 3-wire SPI; Display color: RGB, 65K colors; Resolution: 128x128; Viewing angle: >160° Operating voltage: 3.3V / 5V; Dimension: 44.5 x 37 (mm)
25,99 € AUF AMAZON
YELUFT
YELUFT 5 Stück 0,96 Zoll I2C OLED Display Modul 128 x 64 Pixel IIC Arduino Display für Arduino/Raspberry Pi/ESP32 (Gelb und Blau)
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
128 x 64 Pixel: Dieses OLED display benötigt keine Hintergrundbeleuchtung und ist selbstleuchtend. Es bietet extrem hohen Kontrast, helle und scharfe Punkte und einen Betrachtungswinkel von über 160°, sodass selbst kleinste Schriftarten gut lesbar sind
Keine eingebetteten Schriftarten: Dieses Arduino display enthält keine eingebetteten Schriftarten. Sie können diese mithilfe einer Schriftartengenerierungssoftware erstellen
Änderbare IIC-Adresse: Ist der Widerstand an die 0x7B-Seite angeschlossen, entspricht dies der Adresse des IIC-Slave-Geräts 0x7B; ist er an die 0x7A-Seite angeschlossen, entspricht dies der Adresse des IIC-Slave-Geräts 0x7A
Anwendung: Dieses OLED-Display eignet sich für Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, MSP430, ESP32-Entwicklungsboards usw. Es zeigt grafische und textuelle Informationen direkt von Ihren Geräten an
Parameter: Bildschirmgröße: 0,96 Zoll; Auflösung: 128 x 64; Betrachtungswinkel: > 160 °; Stromverbrauch: 0,06 W; Spannung: 3,3 V oder 5 V DC; Betriebstemperatur: -20 °C bis 60 °C
Hinweis: Gelb-blaues Dual-Color-Licht bedeutet, dass etwa 128 x 15 Pixel oberhalb des Bildschirms gelbes Licht und etwa 128 x 48 Pixel unterhalb blaues Licht sind. Zwischen den gelben und blauen Teilen besteht ein Abstand von etwa 1 Pixel, der Ihre Nutzung jedoch nicht beeinträchtigt. Das Bildschirmmodul kann den Inhalt Ihres Geräts weiterhin klar anzeigen
15,99 € AUF AMAZON
GeeekPi
GeeekPi 2Pcs OLED Display Module I2C IIC 128X64 Pixel 0.96 Inch Display Module Yellow Blue Two-Color Display Compatible with Raspberry Pi Arduino 51 Series MCU STM32 R3 and Mega
16% Rabatt
90
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Fully compatible with for Arduino, 51 series, MSP430 Series, STM32/2, CSR IC, etc.
High resoluton: 128*64 pixels(approx), Super high brightness and contrast are adjustable
Support I2c IIC communication Protocol,the IIC address can be changed,it is convenient to use with different machines.
Interface type is IIC (I2C), Pin Definitions: GND, VCC, SCL, SDA Pins: 4 pins, Voltage: 3.3V DC, Working Temperature: -30°~ 70°, Drive Duty: 1/64 Duty, Driver IC: SSD-1306 ,Display : Yello/Blue, Please noted, the top row is yellow (fixed position).
Package includes: 2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color), 8 x Male to Female Dopunt Wire, 8 x Female to Female Dopunt Wire
9,22 € AUF AMAZON
Waveshare
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
86
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Provide online user manual, please check the manual and our wiki carefully before using!
OLED transparent module, full viewing angle.
Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate.
There are two driver interfaces on the OLED module: 4-wire SPI and I2C interfaces respectively. Two resistors can be soldered on the back of the module. The corresponding communication mode can be selected through the selection of resistors.
The program defaults to SPI mode. If you need to switch the mode, please modify DEV_Config.h. For details, please refer to the program description - bottom hardware interface - interface selection.
29,99 € AUF AMAZON
Waveshare
1.5inch RGB OLED Display Module 128x128 16-bit High Color SPI Interface SSD1351 Driver Raspberry Pi/Jetson Nano/Arduino/STM32 Examples Provided
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/1.5inch_RGB_OLED_Module
24,95 € AUF AMAZON
Coolwell
Coolwell 0.96 Inch RGB OLED Display Module for Raspberry Pi/Arduino/STM32 with SSD1357 Driver 64×128 65K Colors SPI Interface 3.3V/5V
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
For Raspberry Pi 0.96 inch RGB OLED module, 64×128 resolution OLED display, 65K colors, clear and colorful displaying effect
For Raspberry Pi 0.96 inch RGB OLED display, SPI interface, minimizes required IO pins
0.96 inch RGB OLED module for Raspberry Pi, comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
17,30 € AUF AMAZON
Hailege
Hailege 2pcs 0,49" 64x32 OLED LCD Display 0,49 Zoll IIC I2C OLED LCD Bildschirm Modul 64 * 32 4 Pin Weiß
77
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Spezifikation: 0,49 Zoll
0,49 "64 * 32 OLED-Anzeigemodul
Schnittstelle: IIC/I2C 4Pins
Auflösung: 64 * 32; Spannung: 3,0-5,5 V
Wir bieten die Konformitätserklärung an. Dieses Produkt enthält auch ein elektronisches Benutzerhandbuch, das in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Polnisch und Niederländisch verfügbar ist. Wenn Sie Unterstützung benötigen, kontaktieren Sie uns bitte.
8,99 € AUF AMAZON
Coolwell
Coolwell 1.5 Inch OLED Display Module for Raspberry Pi Arduino STM32 SPI / I2C Communication 128×128 Black/White Display Color Embedded SH1107
70
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
1.5 inch OLED module for Raspberry Pi, ultra-narrow bezel, conpact size, with onboard voltage translator
1.5 inch OLED module for Arduino, adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
For Raspberry Pi 1.5 inch OLED dispaly, comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
18,99 € AUF AMAZON
Waveshare
Waveshare 2.42inch OLED Display Module Panel 128×64 Resolution SPI / I2C Communication White Color Version Compatible with Raspberry Pi Jetson Nano
67
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Ultra-narrow bezel, conpact size, with onboard voltage translator
Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
Comes with online development resources (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32/ESP32/Jetson Nano)
DISPLAY COLOR: white DISPLAY SIZE: 55.01 × 27.49mm
COMMUNICATION INTERFACE :4-wire SPI (default) / I2C
21,99 € AUF AMAZON
oled color display
oled display color
esp32 color oled
oled color display arduino
oled display arduino color